home *** CD-ROM | disk | FTP | other *** search
- Path: news.mr.net!usenet
- From: "Michael M. Rye" <1726@topcity.mn.org>
- Newsgroups: comp.sys.amiga.misc
- Subject: Re: Canon BJC-70 printer and A1000
- Date: 3 Jan 1996 14:41:45 GMT
- Organization: Minnesota Regional Network (MRNet)
- Message-ID: <4ce4j9$dfu@news.mr.net>
- References: <4cc929$al5@mapperley.innotts.co.uk>
- NNTP-Posting-Host: 204.73.78.99
-
- cfriend@innotts.co.uk (Chris) wrote:
-
- [snip]
-
- > others. But the driver won't load properly; we get error messages,
- > the most frequent is "Your software is out of date. You need kickstart2.04"
- > or words to that effect.
- > We've tried setting the printer to different emulations, usually
- > Epson LQ2550.
- > The printer doesn't print at all now (except for self-test, which is OK).
- > Worse still, once he's tried to load the driver, he can't load Mini-Office -
- > "memory errors" are reported. (He never had any memory problems before.)
- > If he starts up and doesn't load the driver, he can load the word
- > processor and open a file. But as soon as he tries to print it (-
- > which he used to be able to do-) he gets error messages (I/O error or
- > memory error).
-
- [snip]
-
- Since it's an A1000, I assume it's still running on AmigaDOS/Workbench
- version 1.3 and has not been upgraded higher than that. By the sound
- of your error messages, you need to upgrade the Kickstart and
- Workbench to version 2.04 and try the install of the driver again.
-
- *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- * -Michael M. Rye- (Jedi) | Amiga 1200, '030 50 MHz, '882 50 MHz, *
- * UNIX/C Admin/Design | 6 MB RAM, 850 MB HD *
- * 1726@topcity.mn.org | Amiga 500, 1 chip/2 fast, 2 floppies *
- *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
- * Thought of the Day: *
- * Luke, IÆm your father . . . Join the Dark Side, you knob! *
- *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
-
-